KitchenAid dishwasher not draining troubleshooting (solved)

Dishwashers are a great blessing, especially in winters. It saves you from the load of washing your endless dishes. Takes very little time and is super handy.

KitchenAid dishwashers can be your knight in shining armour but when they stop working because of whatsoever reasons, it gives you a hard time too.

If your dishwasher is not draining, I have for you some easy steps to follow.

Some simple troubleshooting steps can fix your KitchenAid dishwasher and help it drain again.

So without further ado let’s fix your KitchenAid dishwasher.

Faulty drain pump

The most common problem for your dishwasher not draining can be a faulty drain pump.

The drain pump is designed to suck all the water from the dishwasher. The water sucked from the dishwasher is drained by the drainage hose. The suction pump ensures that the water does not remain in the dishwasher area.

To ensure that your drain pump is at fault or not, see whether the dishwasher is experiencing any sort of water collection in the unit.

If your dishwasher is not experiencing this, then your drain pump is not at fault but if your dishwasher is experiencing a water puddle, then you need to change the dishwasher pipe.

clogged drainage valve

One of the old problems with the dishwasher is a clogged drainage valve. Most of the time we leave our dishes for washing without removing the leftover food on the plate. The dishwasher washes the dishes and also let all the leftover chunks wash away with the water. This eventually leads to choking of the drainage valve.

To ensure if your drainage valve is clogged or not, first Look at the valve, second, If you find any accumulated waste on the valve, it means you need to clean your valve. After cleaning your valve you will find your dishwasher in a working condition and it would drain water too.

The drainage hose

As the drainage pipe is the exterior part of the dishwasher, it makes solving the problem easy. The drainage hose usually gets choked due to the accumulation of food particles. All you need to do is to clean the drainage hose, remove all the accumulated waste. When you are done cleaning, attach the hose back to the dishwasher. Now see if your dishwasher is draining water properly or not. If yes, then your problem is solved.

Dirty garbage disposer

one of the other possible reasons for your dishwasher not draining can be a dirty garbage disposer. The garbage dispenser is considered the dirtiest part of the dishwasher as it collects all the garbage and waste. You need to ensure that the garbage disposer is cleaned well on a daily

Basis.

Now the old and new dishwashers may have different garbage disposed issues.

If you have an old dishwasher then all you need to do is to remove the hose from the disposed. Second, you’ll find an attached hose to the disposed. clean the fitting inside the garbage disposer and also wash off the ending part of the drainage hose. After cleaning the hose you’ll find your dishwasher in working condition.

If you have a new KitchenAid dishwasher then all you need to do is that first, look for the garbage disposer. You’ll find a plug inside the disposer. These disposers are unlike the old dishwasher which had an attached hose to the garbage disposer.

During the installation, it is possible that you might have forgotten about removing the plug. If you haven’t removed the plug already please remove it.

We hope that the drainage issue of your KitchenAid dishwasher got solved by the above mentioned troubleshooting steps.

Leave a Comment